TECNO CAMON 11 CF7K SIGNED FIRMWARE

TECNO CAMON 11 CF7K FACTORY/STOCK ROM

Tecno Camon 11 CF7k-H612L-O-181012V115

In this post, I will guide on how to download and install Tecno Camon 11 CF7K factory firmware which is tested 100%. This is Factory released firmware that will enable you to flash or upgrade your tecno Camon 11 or reset it to its Original state. This factory firmware will fix any software related issue on your Tecno camon 11 which include but not limited to the following:

Hang Tecno on logo
monkey virus
Invalid Imei
Lcd Display
Dead boot
Frp Reset
Rebooting/Restarting problem
Unknown baseband
Unroot Tecno CF7K completely
Unbrick
Unfortunately application has stopped

Tecno camon 11 factory firmware infomation

File name: TECNO CAMON 11 CF7K

File size: 1.51gb

File type: rar

Password: no password

Frice: Free
Firmware version 8.1

Download links

Tecno Camon 11 CF7k-H612L-O-181012V115

Mtk Usb Driver

SWD aftersales

SP flash tool

How to Flash / upgrade Tecno Camon 11 using SWD Aftersale

Before flashing this firmware make sure you take a backup of your personal data such as: Music, Videos, Contact, Massages, Pictures Etc
Download Tecno LB8 signed firmware
Download and Install Mtk vcom driver(skip this step if you already have it installed)
Download and extract SWD-aftersales using any extractor software
Open the folder and run "SWD aftersales.exe" as administrator.
Once the tool is launched, click on "setting" logo located at the left side of the tool
Click on "load" button from new window and select the scatter.text file( example: MT6765_Android_scatter.txt) from the folder you extracted the firmware
Click the drop down menu choose "Format upgrade" and click "confirm" button
Then click on "play" button located at the top by left side of the tool
Now wait for the tool to finish loading the firmware.
Once it finishes, connect switched off phone with computer via USB cable. the flashing process will start automatically, don't touch anything just wait for the flashing process to complete. It normally takes about 5-10 minutes depending on the firmware size.
Once you get "download complete" massage, the flashing is done
Now unplug your device and boot it up

How to Flash / upgrade Tecno Camon 11 using Sp flashtool

Before flashing this firmware make sure you take a backup of your personal data such as: Music, Videos, Contact, Massages, Pictures Etc

Download and install mtk usb driver, you can skip this step if the driver is already installed on you computer
Download and extract both Tecno Camon 11 stock rom and Sp flashtool
After you extracted them, then open SP flash tool folder and double click on flash tool exe to launch it.
Once SP flashtool is lunched, click on scatter-loding button located at the right side of the tool a new window will pop up
Now locate the folder where you have extracted the firmware and select MT6739_Android_scatter.txt
Click on download button to start flashing
Now switch off your phone and connect it with the computer using Micro Usb Cable
Once your phone is detected by Computer, the flashing process will start automatically do not disconnet the phone or touch any, you have to wait for about 5-10 minute depends on the firmware size.
Once it is completed, a Green Circle will appear indicating that the flashing process is completed
Now disconnect your phone and switch it on